Bostrom

Today, we carry main lines of Quick range are as follows, windlasses & Chaptans, Battery charger, Water Heater and Bow Thruster.



Nautic Boiler BK

Casing in PVC and composite material
Tank in
316 Aisi stainless steel

Benefits

  • High quality materials
  • Heat exchanger with wide exchange surface
  • Produces hot water from the electric element,
    that is fitted with an adjustable safety bi-thermostat
  • Relief / non-return vale that allows discharging of the water heater in case of disuse
  • Temperatute control panel
  • Adjustable levelling feet

 

The features

  • The heat exchanger used for Quick “Nautic Boiler BK” is in AISI 316 stainless steel.
    The heat exchange capacity is notably higher than that achieved from other manufacturers.
  • The tank is made in AISI 316 stainless steel welded with Argon shielding gas and hence highly resistant to corrosive agents.
  • The electrical heating element is made of Incoloy®.
  • The thermal insulation is high thickness polyurethane foam injected between the cover and tank giving excellent heat retention properties.

 

Nautic Boiler BK2-160-200L Data Nautic Boiler BK2-160-200L Drawing



Nautic Boiler BX 16

The compact dimensions and capacity of the 16
litres 316 stainless tank satisfies a large part of
the market. The BX16 is easy to install and highly
functional. On request it is available with the heat
exchanger only (without electric element).

Tank in AISI 304 stainless steel

Nautic Boiler BX16 Data Nautic Boiler BX16 Drawing



BTH 185 Hydraulic Thrusters

Double propeller made in sturdy composite material.
*Recommanded boat length 10-18m (33-59ft).
*Gearbox in bronze.
*Zinc anode independent from the gearbox and hence easy replaceable.
*Equipped with elastic coupling.

BTH 185-105 Hydraulic Thristers Drawing



BTQ Tunnel 185 – Single Propeller

  • Single propeller made in sturdy composite material.
  • Recommended boat length from 8-15 m (26-49 ft)
  • Solenoids protection carter in sturdy composite material
  • Gearbox in bronze
  • Zinc anode independent from the gearbox and hence easy replaceable.
  • Equipped with elastic coupling.

BTQ Tunnel 185 data BTQ Tunnel 185 drawing



BTQ 140 DC Thrusters

BTQ 140 – Single propeller

  • Single propeller made in sturdy composite material.
  • Recommended boat length from 6-7 m (20-23 ft)
  • Solenoids protection carter in sturdy composite material
  • Gearbox in bronze
  • Zinc anode independent from the gearbox and hence easy replaceable.
  • Equipped with elastic coupling.

BTQ Tunnel 140 data BTQ Tunnel 140 drawing



Nautic Boiler BX

Casing in 304 Aisi stainless steel
Tank in 316 Aisi stainless steel

Benefits

  • High quality materials
  • Heat exchanger with wide exchange surface
  • Produces hot water from the electric element,
  • that Is fitted with an adjustable safety thermostat.
  • Relief / non-return vale that allows discharging 

    of the water heater in case of disuse

The features
The heat exchanger used for Quick “Nautic Boiler” is
in stainless steel AISI 316. The heat exchange capacity is
notably higher than that achieved from other manufacturers.
The tank is made in stainless steel 316 AISI welded with
Argon shielding gas and hence highly resistant to corrosive agents.
The electrical heating element is made of incoloy®steel.
The thermal insulation is high density polyurethane foam injected between the cover and tank giving excellent heat retention properties.

Nautic Boiler AccessoriesNautic Boiler data

 

 

 

 

 

 

 

 

Nautic Boiler drawing

 

 

 

 

 

 

 

 

 



HI-Power Battery Charger

Safety classification EN 60335-2-29
EMC Class
EN 55022/B
FCC PART 15 RULES 47 SUBPART B CLASS B

TAC RINA – Rules for the Classification of Ships – Part C – Machinery, Systems and Fire protection – Ch3, Sect.6, Tab.1. (solo da SBC 500 NRG a SBC 2450 NRG).

Advantages SBC NRG Medium Power

  • Three stage IUoU battery charging.
  • Multiple outputs in order to charge more groups of batteries (Electronic mosfet charge separator inside).
  • Differentiated charging for open or sealed liquid electrolite, GEL or AGM batteries.
  • Integrated fuses inside the battery chargers (for each output).
  • Thermal battery protection (with optional sensors).
  • Ability of providing full output power with low supply voltage.
  • The possibility of using the battery charger as a power supply without batteries
  • Low residual fluctuation on output.
  • Universal AC supply input (264 ÷ 83 Vac, 45 ÷ 66 Hz).
  • Compatible with every kind of generator.
  • Can work in a wide range of ambient temperatures.
  • Variable speed for the cooling fans.
  • User interface that consist of a alphanumeric backlit LCD display with 3 buttons.
  • Automatic and manual power derating.
  • CAN BUS interface for data transfer.

Protections:

  • Reverse polarity (with internal fuses)
  • Overload
  • Output short circuit
  • Over-voltage in output
  • Overheating
  • Battery over-temperature (with optional sensors)

Hi Power Battery logo

 

Hi Power Battery data

 

 

 

 

 

 

 

 

 

Hi Power Battery drawing



Medium Power Battery Charger

Safety classification EN 60335-2-29
EMC Class
EN 55022/B
FCC PART 15 RULES 47 SUBPART B CLASS B

TAC RINA – Rules for the Classification of Ships – Part C – Machinery, Systems and Fire protection – Ch3, Sect.6, Tab.1. (solo da SBC 500 NRG a SBC 2450 NRG).

Advantages SBC NRG Medium Power

  • Three stage IUoU battery charging.
  • Multiple outputs in order to charge more groups of batteries (Electronic mosfet charge separator inside).
  • Differentiated charging for open or sealed liquid electrolite, GEL or AGM batteries.
  • Integrated fuses inside the battery chargers (for each output).
  • Thermal battery protection (with optional sensors).
  • Ability of providing full output power with low supply voltage.
  • The possibility of using the battery charger as a power supply without batteries
  • Low residual fluctuation on output.
  • Universal AC supply input (264 ÷ 83 Vac, 45 ÷ 66 Hz).
  • Compatible with every kind of generator.
  • Can work in a wide range of ambient temperatures.
  • Variable speed for the cooling fans.
  • User interface that consist of a alphanumeric backlit LCD display with 3 buttons.
  • Automatic and manual power derating.
  • CAN BUS interface for data transfer.

Protections:

  • Reverse polarity (with internal fuses)
  • Overload
  • Output short circuit
  • Overvoltage in output
  • Overheating
  • Battery overtemperature (with optional sensors)

Hi Power Battery logo

 

Medium Power Battery Data Medium Power Battery Drawing



Mini/Low Power Battery Charger

Safety classification EN 60335-2-29
EMC Class
EN 55022/B
FCC TITLE 47 PART 15  SUBPART B CLASS B

Advantages SBC NRG Mini-Low Power

  • Three stage IUoU battery charging.
  • Multiple outputs in order to charge more groups of batteries (Electronic mosfet charge separator inside).
  • Differentiated charging for open or sealed liquid electrolite, GEL or AGM batteries.
  • Integrated fuses inside the battery chargers
  • (for each output).
  • Ability of providing full output power with low supply voltage.
  • The possibility of using the battery charger as a power supply without batteries
  • Low residual fluctuation on output.
  • Universal AC supply input (264 ÷ 83 Vac, 45 ÷ 66 Hz).
  • Compatible with every kind of generator.
  • Can work in a wide range of ambient temperatures.
  • Variable speed for the cooling fans.

Protections:

  • Reverse polarity (with internal fuses)
  • Overload
  • Output short circuit
  • Overvoltage in output
  • Overheating

Hi Power Battery logo

 

Mini & Low Power Data Mini & Low Power Drawing

 

 



Totem TM3

Totem TM3

  • Warping Winches
  • AISI Stainless steel 316 base
  • Vertical watertight motor for easy and fast drop-in installation
  • Anodized aluminium gearbox

The TM3 warping winches is equipped
with an epicyclical gearbox, that provides
much higher efficiency (40% compared to
equivalent traditional gearboxes)

Totem accessoriesTotem accessories 2

 

Totem data

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Totem Drawing 1



Tumbler TB7/AC/HYDRO *New*

  • Warping Winches
  • AISI Stainless steel 316 base and drum
  • IP67 watertight motor (HYDRO)
  • Anodized aluminium gearbox

Tumbler

 

 

 

Tumbler 2

 

 

 

 

Tumbler data Tumbler drawing Tumbler accessories

 

 

 

 

 

 

 

 

 

 

 

 

 

 



Genius-GP2 *New*

  • Horizontal on-deck windlasses
  • Anodized alluminium in hard oxide base
  • White composite material base (GP2 500)
  • Rope and chain on a single gypsy
  • Integrated sensor and magnet for chain counter
  • Available with manual Free-Fall system (GP2 500 only manual)
  • Supplied with pressure lever
  • IP66 watertight motor
  • Epicyclical gearbox (GP2 1500-2000)


Barbotin
Gypsy and Drum
Ø 105 mm / 4″ 9/64

GP2 Genuis 2 GP2 Genuis 3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GP2 Genuis Data GP2 Genuis Drawing

 



Hector-HC3

  • orizontal on-deck windlasses
  • Base in anodized aluminium in hard oxide
  • Jacket in composite material or in alluminium anodized in hard oxide
  • With and without drum
  • Rope and chain on a single gypsy
  • Integrated sensor and magnet for chain counter
  • Supplied with pressure lever
  • Integrated solenoids unit
  • Emergency manual lift system
  • Manual Free-Fall system
  • IP66 watertight motor


Gypsy and Drum
Ø 130 mm / 5″1/8

Hector 1

Hector Accessories Hector Data Hector Drawing



Dave-DV5 XY

  • Vertical windlasses
  • Stainless steel Aisi 316 base and anodized aluminium
  • With and without drum
  • Rope and chain on a single gypsy
  • Integrated sensor and magnet for chain counter
  • Manual Free-Fall system
  • Safety mechanical band brake
  • Supplied with pressure lever
  • Inspection cover
  • Motor watertight to IP67 (1700W)
  • Motor watertight to IP66 (2000/2300W)
  • Anodized aluminium gearbox

Gypsy and Drum
Ø 170 mm / 6″21/64

 

Dave 2

 

 

 

 

 

 

Dave 3 Dave Data Dave Drawing



Dylan-DN4

  • Vertical windlasses
  • Stainless steel AISI 316 and anodized aluminium
  • With and without drum
  • Rope and chain on a single gypsy
  • Integrated sensor and magnet for
    chain counter
  • Manual Free-Fall system
  • Emergency manual lift system
  • Supplied with pressure lever
  • Inspection lid
  • IP67 watertight motor (1500-1700W)
  • IP66 watertight motor (2000W)
  • Anodized aluminium gearbox

BarbotinGypsy and Drum
Ø 142 mm / 5″ 19/32

Dylan 2 Dylan Data Dylan Drawing

 



Prince-DP1

  • Vertical windlasses
  • Aisi 36 Stainless steel base
  • With and without drum
  • Integrated sensor and magnet for chain counter
  • Manual Free-Fall system
  • Inspection cover
  • IP67 Watertight motor
  • Anodized aluminium gearbox

Gypsy and Drum
Ø 90 mm / 3″ 35/64

Prince DP 1 b Prince DP1 Data Prince DP1 Drawing