Bostrom

SPEICH has been operating in the marinetime and nautical sector since 1938, when the first clear view screen was patented.

Over the year the company has specialized in production of high quality windscreen wiper systems specifically for marine enviroment, according to strict reliability and durability criteria.

Production flexibility and experience have allowed the company to specialize in producing made to measure system and their success is confirmed by the populary of Speich windscreen wipers world-wide.



Anti-Glare Screens

Made to measure
Width: up to 3600mm
Height: up to 3500mm



Baionet fixing system blades

For Nautic type E arms only
Wiper blades type E37, have a 7mm bayonet fastenings and are available for sizes 280, 330, 400, 450, 500mm.



Type BH Blades

Blades for curved screens
Lengths
500-600
650-700
800-900
1000-1200
1300

Speich BH Blade-Drawing



Type AR Blades

Rubber covered blades for curve screens
Lengths
390-470

Speich AR Blade-Drawing



Type MG Blades

Rigid blades for flat screens
Lengths
300-350
400-450
500

Speich MG Blade-Drawing



U Shape fixing system blades

Use the table to select the correct fixing system based on the dimensions of the blade.

U Fixing Chart



Nautic type LP range – Torque 42Nm

The motor unit generates the alternating movement of the wiping arm.
It’s available for 12V and 24V DC, has two speeds, self-parking device and variable wiping angle “a“.

Speich-Torque 42Nm-Motor Units-Technical feature

 

 

 

 

 

 

 

 

 

Speich-Torque 42Nm-Motor Units-Drawing



Nautic type E range – Torque 10Nm

The motor unit determines the alternating movement of the wiping arm; the rotation angle of the arm is called “wiping angle a”.

Spiech-Torque 10Nm-Motor Units-Features

 

 

 

 

 

 

Spiech-Torque 10Nm-Motor Units-Motor Drawing



Control for One Wiper Motors

CT42 is a microcontroller based wiper control for operating two wiper motors; it provides all the functions for a proper windscreen cleaning.

Code: CT42

Technical Features

  • Voltage supply: 12Vdc or 24Vdc
  • Max current for each motors output: 4A
  • Protection 4 Amps PTC
  • Able to drive two speed motors
  • Activates and deactivates each wiper one by one
  • Synchronization in each selected mode
  • Three interval delay
  • Self parking with dynamic brake
  • Wipe and washing program
  • Dimmer input
  • Standard switch size compatible
  • Protected to Polarity inversion

 

Dimensions

CT42_Dimension-Drawing



Single Wiper Motor Rotary Switch

Single Wiper Motor Rotary Switch

Code: ESW

Technical features

  • For two speed motors
  • Rotary switch without dynamic parking
  • Voltage: 12 – 24V


Control Panels UCS

Code: UCS.12SH (96×96 depth 165)

The Control Panels UCS is available to drive one or two wiper motors and up to three auxiliaries devices. The electronic part is placed inside the control panel housing.
On the rear part of the panel are located the terminals for the electrical connection.
Following IEC 61554, three different panel sizes are available depending on the chosen model (See drawing below): 96 x 72 / 96 x 96 / 96 x 144, all of them with 165mm depth.

  • Suitable for windscreen wiper systems SPEICH type M, S, SF, PG
  • Able to drive the wiper motors independently or/and in group mode
  • Wiper working mode: continuous or intermittent working is synchronized for all switched on wiper motors
  • Motors overload protection
  • Custom made panel layout

Technical features

  • Voltage: 24 – 110 – 220V
  • Wiper systems type driven: One speed motor type M-S-PG
  • No. of driven wipers: 1 – 2
  • Auxiliaries:0 – 3
  • Working mode: Continuous or interval mode
  • Interval mode: Synchronized
  • Motor thermal protection: On the panel
  • Electronic: Inside panel

Available models

UCS_tipologie_big

 

 

 

 

 

 

 

 

Code: UCS.1 (96×72 depth 165)

UCS.1_big

 

 

 

 

 

 

 

 

Code: UCS.2 (96×96 depth 165)

UCS.2_big

 

 

 

 

 

 

 

 

 

 

 

Code: UCS.22SH (96×144 depth 165)

Speich-UCS 22SH-Controls

 

 

 

 

 

 

 

 

 

 

 

Spiech-Torque 10Nm-Motor Units-AUX switch



Soft Touch Control Panel PNS

Code: PNS05
With PNS Cntrol panels it’s possible to drive from 2 to 5 wiper motors with synchronized movement.
On the panel you can find the main switch to start all the motors together; it’s then possible to change the working mode choosing between interval delay or continuous movement.
Single wipers can be switched on and off as necessary. This also a button used for the operation of the washing system.

Note: All motors movement is synchronized both in the interval and continuous working mode.

Technical features

  • Voltage: 12 – 24V
  • For single speed motors
  • Synchronized movement for motor units
  • Windscreen washer system switch
  • Can drive from 2 to 5 windscreen wiper simultaneously
  • Small size panel

PNS Switch

 



Straight Line Wiper type PG

Speich single blade (mod. PG) and twin blade (mod.PGD) straight line wipers, have been designed specifically for naval applications.
Straight line wipers are especially suited for very large window areas.
An ideal installation is obtained on windows with a base length of at least 1.5 times the window height.

Description,
All Speich straight line wipers and components are made and assembled in our factory, where since 1959, we produce windscreen windscreen wipers systems designed specifically for naval applications. These specialised systems are distributed world wide.
Simple design and construction coupled with the use of only the highest quality materials guarantee the reliability and trouble-free maintenance of every wiper system.

Straight line wiper features



Clear View Screen type EX

First produced in 1938, the SPEICH Clear View Screen is a high technology product, carefully engineered in all it’s detailed and designed according to ISO 3904. many decades of field experience and constant technical improvements have made the SPEICH Clear View Screen extremely reliable and durable even under the severe environments conditions.
Ten of thousand units have been supplied all over the world and are installed on all kind of merchant and military ships, yachts and tugboats.
Schematically, SPEICH Clear View Screen keeps a glass disk free from rain, snow or sea-water by fast rotation.
The motor is placed in the center and is fastened to the fixed glass so as to obtain the largest possible field of vision.
This particular assembly also makes the unit water and airtight, thus making it suitable for pressurised and air-conditioning bridges. The rotating glass is hardened and optically ratified to avoid any optical distortion. The electric motor is available for many tensions; the rotor is tropicalized and turns on silent ball-bearings.
All metal parts are made of brass; a specially design manifold between the ring surrounding the rotating glass and the fixed frame keeps water from entering the space between the fixed and rotating glass. This space can optionally be heated by electric resistance to avoid condensation and ice formation. Which could prevent proper operation counter-ring.

This unit is designed to be installed in a circular hole cut in a glass, wood, acrylic or metal surface (1). The hole diameter is indicated in the table below.
The unit is assemble by flange and countering (5), made airtight by neoprene gasket.
The fixed hardened glass disk supports the motor (4) which rotates the optically rectified glass disk. On request is supplied with a heating element (6) to prevent condensation and formation of ice. Metal parts are turned and can be chrome plated on request.

Type EX dimensions

 

 

 

 

 

 

Type EX technical

 

 



Professional type S range – Torque 80Nm

Motor unit type S is used when powerful wipers with arms up to 1200mm and blades up to 1300mm in length are needed. This motor has variable wiping angle and it is designed for heavy duty applications.
Self-parking position, can be set either left or right.

Speich-Torque 80Nm Type SF range- Technical

 

 

 

 

 

 

 

 

 

 

 

 

Code Motor S
The code of motor unit type S is compose as follows; S.t.d.a.
Where the “S” indicates the type, “t” the voltage, “d” the thickness of the bulkhead and “a” the wiping angle.

Example,
to order a motor unit type S, 24V with wall thickness 30mm and 75° wiping angle, it is necessary to indicate the following code: S.024.30.75.

to order a spare motor unit, it is necessary to communicate the serial number of the motor to be changed. The serial number is written on a label placed on the back of the motor.

Wiper Arms
The arms are custom made using AISI316 stainless  steel.
The standard finish is hand polished natural color.
On request it is possible to supply the arms in black.
Arms length is from 500mm to 900mm for both pantograph and pendulum setups, in either single or double configurations.

Speich-Torque 80Nm Type SF range-Pendulum arms Speich-Torque 80Nm Type SF range-Pantograph arms

 

 

 

 

 

 

 

 

 



Professional type SF range – Torque 80Nm

Motor unit type SF Shall be used when it is necessary to employ a  powerful wiper with arms up to 1200mm and blades up to 1300mm in length are needed.
The motor unit is quipped with an electromagnetic in order to have a stable park position.

Motor SF Technical

 

 

 

 

 

 

 

 

 

 

 

Code Motor SF
The code of motor unit type SF is composed as follows: SF.t.d.a.
Where “SF” indicates the type, “t” the voltage, “d” the thickness of the bulkhead and “a” the wiping angle

Example,
To order a motor unit type SF, 24V with wall thickness 30mm and 75° wiping angle, it is necessary to indicate the following code: SF.024.30.75.
To order a spare motor unit, it is necessary to communicate the serial number of the motor to be changed.  The serial number is written on a label place on the back of the motor.

Wiper Arms
The arms are customer made using AISI316 stainless steel.
The standard finish is hand-polished natural color.On request it is possible to supply the arms in black.
Arms length is from 500mm to 900mm for both pantograph and pendulum setups, in either single or double configurations.

 

 



Professional type M range – Torque 45Nm

Motor unit type M is designed to be used on medium sized windscreen wipers installed on work boats for civil and military applications.
This motor has variable wiping angle and it is designed for heavy duty applications.
Self-parking position, can be set either left or right.

Motor M Technical

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Code Motor M
The type of motor unit type M is composed as following: M.t.d.a
Where “M” indicate the type. “t” the voltage, “d” the thickness of the bulkhead and “a” the wiping angle.

Example,
To order a motor unit type M, 24V with wall thickness 40mm and 65° wiping angle, it is necessary to indicate following code, M.024.30.75.
To order spare motor unit, it is necessary to communicate the serial number of the motor to be changed. The serial number is written on a label placed on the back of the motor.

Wiper Arms
The arms are custom made using AISI316 stainless steel.
the standard finish is hand-polished natural color.
On request it is possible to supply the arms in black.
Arm length is from 300mm – 900mm for both pantograph and pendulum setup, in either of single or double configuration.