All Teleflex Marine Steering cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirement.

Teleflex Marine Steering cables are designed with a rotary or rack and pinion design to fit various helm space and application requirements. Both designs have a tightly controlled core to conduit fit to offer precise steering.

The outer jacket is contructed with HDPE a high density poluethylene material that is abrasion reisistant and provides a high resistance to water penetration. All cables feature output ands contructed of stainless steel material.

  1. Outboard
  2. Inboard
  3. Sterndrive
  4. Jet Boat Steering/Catamaran
  5. Dual function controls
  6. Single function controls
  7. Electronic controls
  8. Control Cables

BayStar Helm

BayStar hydraulic steering is brought to you by the manufacturers of SeaStar®, the most trusted name in pleasure boat steering. BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated to a MAXIMUM of 150 HP (total). Combine this with a superior design rigid ISO quality control and the finest materials and precision manufacturing—BayStar continues the tradition bringing comfort and safety to boating.


bay helm selection guide

Rear Mount Helm

Features and Benefits

• Behind dash mounting configuration
• Available in 1.4, 1.7 and 2.4 cubic inch displacements
• Top of dash fill point
• Complete with elbow fittings


rear mount helm drawing



















rear mount helm order guide












SeaStar Sport Tilt


The ultimate in Tilt Steering Technology. Tilt Steering delivers unsurpassed performance and flexibility making it the perfect system for all possible applications and boat types.

Features and Benefits

• Newly designed Tilt Mechanism.
• 5 wheel positions allow adjustment to most comfortable steering position.
• 48 degree tilt range (12 down – 36 up).
• Available in 1.7, 2.0 and 2.4 cubic inch displacements.
• Remote fill point.
• Complete with elbow fittings.


Sport Tilt Helm Drawing






















Sport Tilt Helm selection guide



SeaStar offers rugged 3-line Hynautic Heavy Duty steering systems for most work and pleasure vessels up to 70 feet.

Heavy Duty helms combine one or two bi-directional axial piston pumps with pilot check and make-up check valving. The result is a unit which prevents rudder feedback, is very efficient (even at low RPM), and is immediately adaptable to multi-station use.

A wide choice of helm displacements and cylinder configurations make it easy to spec a system which can handle a variety of large boat performance requirements and accommodate most user preferences.


• Low friction heavy duty hydraulic steering.
• Helm/cylinder combinations for most inboards. Marine grade materials.
• Heavy duty helms available in three displacements, to accommodate most applications and user preferences.
• Helms available with 1” straight shaft or 3/4” tapered. Mount facing any direction.
• Quick air purge relief valve.
• Fluid fill at remote reservoir.
• Heavy duty brass cylinders. Two-axis articulation. Easy installation for single or dual rudder vessels.
• Meets or exceeds applicable standards.
• Accepts most steering wheels.


BayStar Inboard (International only)

Built in the same tradition as SeaStar Inboard Steering, these BayStar Systems are designed for relatively low torque inboard applications, including inland waterway boats and other low speed displacement vessels. The systems are easy to install with “cut-to-length” tubing. Available in complete kits or by individual components. (If unsure of total steering loads, contact SeaStar Solutions® Technical Support for assistance)

• Compact cylinder design.
• HC4460-3 – 6.25” stroke.
• HC4461-3 – 6.0” stroke.
• Optional Tilt helm available.
• Helm fits standard 3” dash cut outs.
• Fast easy installation.

The products on these pages are NOT for sale in North America. These products are only available internationally.


Baystar Inboard order guide

SeaStar Inboard

SeaStar Inboard Steering Systems are engineered and manufactured for all Pleasure and Work Boat applications up to 50ft. with some exceptions. See the Application Guide below for specific details.

For Commercial and Work Boat applications over 50ft. (11.5m) and Pleasure Boats not included in the Application Chart below please refer to our Capilano range of Inboard Steering Systems.

• Regular duty aluminum cylinders.
• Heavy duty brass cylinders.
• Easy installation for single and dual rudder vessels.
• Cylinders supplied with bleeder fittings.
• Two axis articulation.
• Easy autopilot interface.

Four steps to select a steering system for an Inboard powered boat.

1. From the Application Guide below select the System Number appropriate for the vessel based on:
a) hull type – displacement or planing,
b) length of vessel,
c) number of rudders, and
d) usage of vessel.
2. From the Order Guide below select the appropriate helms and accessory hardware for each steering station.
3. From the Order Guide select the fitting and hose kits required for the installation.
4. Confirm that you have sufficient space available in:
a) the area the cylinder is to be mounted, and
b) the dash area for the steering components.

Seastar inboard application guide


Capilano Helms and Cylinders are engineered and manufactured for heavy duty marine usage, and are suitable for commercial, work boat and pleasure boat applications. Capilano Hydraulic Steering has been designed to meet ABS, Lloyds and DNV specifications.

For all Pleasure and Work Boat applications 38ft. (11.5m) and smaller with some exceptions, please refer to our SeaStar range of Inboard Steering Systems.

• Regular duty aluminum cylinders.
• Heavy duty brass cylinders.
• Easy installation for single and dual rudder vessels.
• Cylinders supplied with bleeder fittings.
• Two axis articulation.
• Easy autopilot interface.


Capilano selection guide

SeaStar Tournament Series Cylinder and adjustable Tie Bar

Extreme heavy duty cylinders and tiebars designed for primarily high performance multiple engine applications. Also available for single engine applications.

Seastar tournament series engine configuration






Seastar tournament series order guide















Seastar tournament series installation note

SeaStar Pro Outboard

SeaStar PRO Outboard Steering systems are suited for all those critical high speed, single powered outboard boats, like Bass, Flats, combo Race/Ski and other performance orientated boats capable of speeds in excess of 65mph. Before ordering it is necessary to determine the proper cylinder and helm pump for your application. See application guide below. All SeaStar PRO systems require the use of a SeaStar PRO helm and SeaStar PRO (1500psi) reinforced Kevlar hoses ONLY!

Seastar Pro is for high-performance boats with single non-power-assisted outboards up to 300 HP, especially those capable of speeds over 65 MPH, which demand maximum steering control and comfort. It is suitable for use with high-performance propellors and jack plates.

• Patented steering lock valves.
• Low friction hydraulic steering system.
• 4.25 turns from lock-to-lock.
• Compact helm has only a 4-7/16” footprint — needs only 3” dash hole (Tilt requires larger hole).
• Optional PRO Cylinders with longer shaft bushings and larger pivot bushings for an even more solid feel!
• Factory swagged hoses are Kevlar® reinforced.
• Packaged complete with helm, cylinder, fittings, oil, bleeder kit and detailed instructions.
• Standard 3/4” tapered steering shaft.
• Fast, easy installation.
• Meets A.B.Y.C. standards.
• Meets N.M.M.A. certification requirements.


SeaStar Outboard (Front Mount)

• General purpose system
• Single and multiple engine capability
• Total power to 700 HP
• Typical applications include center console fishboats and cruisers

• Independent engine tilt for twin engine installations
• Easy steering
• 5 turns lock to lock steering response

BayStar Outboard

BayStar™˙hydraulic steering is brought to you by the manufacturers of SeaStar®, the most trusted name in pleasure boat steering. BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated up to MAX. 150HP (Total). Combine this with the superior Teleflex Canada Limited Partnership design team, rigid ISO quality control and teamed with the finest materials and precision manufacturing—BayStar continues the tradition bringing comfort and safety to boating.

The BayStar steering system consists of a super low friction helm for smooth comfortable steering, a balanced cylinder–featuring a compact design that fits most splash-wells. For your convenience two lengths of 20’ cut to fit tubing are supplies (2 x 20’ length), two bottles of hydraulic steering fluid, and one fill tube for easy fill and purge.

BayStar is NOT recommended for use with high performance, 150HP engines (such as Mercury Optimax 150HP engines).

BayStar is NOT recommended for use on any single engine, high speed boat (such as Bass Boats). Applications such as these should use SeaStar PRO systems only.

• Patented No FeedBack™ Steering lock valves.
• 5 turns lock-to-lock.
• Up to 150 horsepower (total).
• Available either as separate components or as a complete system ready to install.
• Fixed cylinder.
• BayStar hydraulic tubing cut to suit application.
• Tilt option available.
• Requires 3” (76mm) cut-out hole in dash.
• Requires 21” (534mm) splash-well width.

DO NOT use BayStar on smaller HP outboard engines that use wing nut type transom mount clamping screws.

Tilt Helm HH4315 is available separately. Currently not available in kit form.

Engine Controls Cables (International Only)

A complete range of control cables to suit all applications available in “standard”, “midrange” and “supreme” styles. Gen II type cable designed specifically to be used with Mercury 4000 series controls.


• All cables have stainless steel end terminals
• Standard cables use stainless steel Lubricore core wire for smooth operation and long life
• Midrange cables use a heavier jacket and stainless steel Lubri-core
• Supreme cables use a specially coated core wire

XTREME Control Cables

With it’s unique splined core XTREME delivers unparalleled smoothness and efficiency – with hardly any lost motion – even in the longest and most complex cable routings. This gives superior feel at the control, performance that until now was considered ‘impossible’.

Traditional cables vary by the stiffness of the core wire and how tightly it fits in the casing. Thus the classic trade-offs that have existed in control cable design: Stiffer core/tighter fit offers less lost motion, but is harder to move. With longer and more complex runs, cable movement becomes progressively more difficult.

More flexible core/looser fit has an easier feel, but allows more lost motion. This approach leads to an overall sloppy feel, RPM loss or difficult gear engagement.

These trade-offs aren’t an issue for cables with XTREME technology because they are different — really different!

SeaStar Solutions®’s unique XTREME technology incorporates a patented splined core. Ridges on the core allow a close fit with the cable’s inner liner, but with minimum contact, so the core glides back and forth smoothly like a skater on ice.

RESULT: a control cable with easy movement AND minimum lost motion.

Xtreame cable drawing
















• XTREME’s unique design incorporates a patent-pending splined core which allows easy movement and minimum lost motion
• Designed for complex and/or long cable runs (or to simply create a superior feel)
• Available in several style options avoiding the need for adaptor kits
• All XTREME cables are available in 1ft increments
• Gen II type suits Mercury 4000 series controls

Ski/Jet Boat CH2200P/2300P

For ski boat and jet boat applications, these controls feature superior styling, a compact design, positive lockout with a smooth feel, allowing for precise throttle control. Dual action design (one lever to control both shift and throttle functions). Waterproof neutral safety switch standard on jet unit (optional on ski model). Uses 33C type cables.


• Single lever, dual action for throttle and shift
• Superior neutral engine warm-up control (ski version)
• Jet version – Jet boats powered by Mercury sport Jet and OMC turbo jet
• Ski version – suits most ski boats
• Flush mount design for quick, tidy installation
• Includes hardware for two 33C type cables
• Neutral safety switches:
- Optional for ski version
- Waterproof type included with jet version

• Weatherproof exterior, rugged diecast frame
• Can be used in a dual station application with the DS unit and XTREME control cables

Please note that while the CH2200P and the CH2300P are similar in appearance, they have different neutral safety switches and internal mechanisms. They are NOT interchangeable.  Do not substitute CH2200P for CH2300P or vice-versa.

CH2600P/2700P Side Mount

Outboard Side Mount Control. This economical single lever, dual function control features positive shift detents, an optional engine trim switch in the handle and easy installation. (Mounts to gunwale surface — no hole cutout required.) It’s an excellent replacement for both outboard and stern drive controls using universal (3300/33C type) cables only.

Dual-function control — each lever controls throttle AND shift. Virtually all single-station outboards and stern drives with mechanical transmissions. Single lever, dual action design controls throttle and shift with one lever. Utilizes 3300/33C type “universal” engine control cables only. Not suitable for use with Mercury® and OMC® OEM type control cables.


• Single lever, dual action for throttle & shift.
• Surface mount design for quick, tidy installation.
• Includes neutral warm up capability.
• Includes hardware for two 3300/33 control cables.
• Positive shift detents and neutral lock- out.
• Optional engine trim switch in handle. (CH2700P)
• Optional neutral safety switch.
• Weather resistant exterior, rugged die cast frame.
• Meets/exceeds all applicable industry standards.

MT-3 Top Mount

World’s most popular classic design, dual action, top mount controls. Chrome finish, available in single or twin engine versions.


• Dual action (throttle and shift in one lever)
• Sturdy control provides one-handed positive engine control
• Neutral warm-up is done by pulling out the hand levers in the neutral position
• Built-in friction drag helps reduce slippage and throttle creep while underway
• Includes hardware for 3300/33C control cables
• Single Lever may use 4300 series control cable with hardware kit 308742
• Can be used in a dual station application with the DS unit and XTREME control cables